Part Number 9294844 April 6, 2023 71
Section 4 Maintenance
Rinsing Instructions
1. Remove cleaning manifold from wash bucket.
2. Place cleaning manifold in rinse bucket.
3. Press the Green Check to begin rinsing the lines.
This will automatically send the rinse solution through each
line (slot) that was selected, displaying the progress on the
screen, 30 seconds per slot.
When rinsing has completed, the Sanitization Instructions
screen will appear automatically.
Sanitization Instructions
1. Remove cleaning manifold from rinse bucket.
2. Place cleaning manifold in the sanitize bucket.
3. Press the Green Check to begin sanitizing the lines.
This will automatically send the sanitizing solution through
each line (slot) that was selected, displaying the progress on
the screen, 30 seconds per slot.
When sanitizing has completed, the Purging Instructions
screen will appear automatically.
Purging Instructions
1. Disconnect the cleaning hoses from the product
nozzles.
2. Press the Green Check to begin purging the lines.
Air is pushed through each line (slot) that was selected,
blowing out any remaining liquid, displaying the progress
on the screen, 30 seconds per slot.
When purging has completed, the Reinstall Inventory
screen will appear automatically.
To Next Page
Loading...
