72 Part Number 9294844 April 6, 2023
Maintenance Section 4
Reinstall Inventory
1. Retrieve product holders from refrigerated storage.
2. Reinstall each product holder into correct slot.
3. Remove splash guard from dispense area.
4. Reinstall center grate under dispensing area.
• Press the Down Arrow to continue.
5. Place a large cup under dispensing nozzles.
6. Press the Green Check to continue to the next screen.
Select Slots to Prime
A. Touch each slot that needs to be primed. Only the
slots that were selected at the beginning of this
sequence and flushed will be available as a choice.
• Selected slots will become highlighted in green.
A
B
NOTE: If a line that does not have product assigned was
cleaned, it will not need priming.
B. The Green Check will appear once a slot has been
selected. Once all the slots to be primed have been
selected, press the Green Check to continue.
This will automatically prime each line that was selected
with product. The screen will read PRIMING SLOT X. Each
slot will change from PURGED to PRIMED.
When priming has completed the Prime Complete screen
will appear automatically.
Auto Prime Complete
1. Remove and dispose of large cup with primed product.
2. Press the Green Check to continue to the Dispensing
Area Cleaning screen.
1
2
3
4
5
6
7
8
To Next Page
Loading...
