Operation
Packing products
44 11.06.2014
¾ If necessary, use filling plates.
– The pouch neck should be located at the centre of the pouch
height x.
¾ Use the sloping insert for packaging liquids, see Section 5.1 "IN-
SERT AND REMOVE THE SLOPING INSERT ".
– Liquid cannot escape from the film pouch.
¾ Switch on the machine.
¾ Set the times.
WARNING
Health hazard!
Insufficient or sporadic cleaning can promote the growth of micro-
organisms which can contaminate the product.
This can pose serious health hazards for consumers.
¾ Disinfect your hands should they come into contact with any
machine part other than the operating elements.
¾ Do NOT lay the product on the machine.
¾ Observe the company cleaning guidelines.
¾ Follow instructions in the chapter 'Cleaning'.
¾ Fill the film pouch.
Info
The products should be as cool as possible for a good pack result.
The optimum temperature for the packaging procedure is approx. 2
°C.
To Next Page
Loading...
