Step 1 : Pick an installation spot .............................................1
Step 2 : Unpack the machine ..................................................2
Step 3 : Setup the machine ....................................................
3
Step 4 : Install the consumables .............................................
5
Step 5 : Load paper into the cassette .....................................
7
Step 6 : Connect the cables ....................................................
9
Step 7 : Turn the power on ....................................................
11
Step 8 : Turn off the transport mode .....................................
12
Step 9 : Initial setup ..............................................................
13
Step 10 : Set the paper size .................................................
15
Step 11 : Assigning an IP Address .......................................16
Step 12: Browser-based setup .............................................
20
Step 13: Setup e-mail server ................................................
21
Step 14 : Driver installation for network printing ...................22
Step 15 : Driver installation for local printing and scanning ..23
Installation Manual
The steps to setup the machine
To Next Page
Need help?
General
