Muratec MFX-1430 - Step 7: Turn the Power on

11Installation Manual
Step 7 : Turn the power on
1
Turn the power on.
The markings are international standards: [ | ] means on, [
] means off.
2
If you are installing MFX-2030 or MFX-1430, perform Step 8 “Turn off the
transport mode” first (see next page). Once the transport mode has been
turned off, you may procedure to the next procedure.
3
In some cases the following message will appear. If this message appears,
please enter the current date and time, then press [Enter].
U.S. European and Asian countries
NOTE: The calendar format may vary according to the countries.
4
The “Server Initializing” message will appear on the display.
Please wait a few minutes until it disappears.