Muratec MFX-1430 - Connect the Power Cord

10 Installation Manual
3
Plug the LAN cable into the LAN connector.
LINE
P
H
O
N
E
1
P
H
O
N
E
2
4
Plug the other end of the LAN cable into a 10Base-T/100Base-Tx Ethernet
hub, or into the appropriate RJ-45 wall jack.
Ethernet hub
Connect the power cord
1
Plug the non-pronged end of the supplied AC power cord into the AC
socket on the machine.
L
IN
E
P
H
O
N
E
1
P
H
O
N
E
2
2
Plug the pronged end into a properly grounded AC outlet.
NOTE : The appearance of the plug and outlet differs according to the countries.