1-44 Logging In / Logging Out
Logging In / Logging Out
To use the machine after receiving user authentication, perform a login. If you perform a
login, you can use the following functions.
Personal settings•
*1
(See page 1-40.)
Printing and transmitting documents in the user box•
*1
TTI (using user registered information)•
Scan path notification•
Security print•
User access/cost accounting•
*1
Journal report (with the user name printing in the sender field)•
*1 These functions cannot be used when the user authentication method is set to
[Network].
For details on setting user authentication, refer to “• Setting User Authentication”. (See
page 2-35.)
When the “Guest Account Setting” is effective at Machine Policy Setting on the •
OfficeBridge, press <Reset> to use the machine as a guest.
Logging In
Press <Login> on the
1
ready screen.
If the ready screen is not displayed, press <Reset> to display the ready screen, and then press
<Login>.
Select the user ID, and press [Enter].
2
If the user ID entry screen is displayed, press [Input User] to select the user or enter the •
user ID, and press [Enter].
To set user authentication or the machine policy, press [Input User] to enter the user ID.•
To Next Page
Loading...
Need help?
General
