Muratec MFX-2570 Administrator's Guide

Setting Security Codes 2-7
1
2
Management
Enter the new password again, and press [Enter].
6
Setting the Protect Passcode
You can set a four digit number of your choice for the protect passcode. Make sure to
make a note of and store the number after setting it.

Setting the Protect Passcode
Press <Setting>.
1
Press [Management].
2
If an administrator password is set, enter the password and press [Enter].
3
If an administrator password is not set, proceed to step 4.
Press [Protect Passcode].
4

Muratec MFX-2570 Specifications

General

Brand	Muratec
Model	MFX-2570
Category	All in One Printer
Language	English