2-8 Setting Security Codes
Enter the protect passcode using the numeric keys, and press [Enter].
5
Enter a four digit number.
Make sure to make a note of and store the protect passcode you set so that you do not
forget it. It is also necessary to enter the protect passcode when disabling it.
Editing / Deleting the Protect Passcode
Press <Setting>.
1
Press [Management].
2
If an administrator password is set, enter the password and press [Enter].
3
If an administrator password is not set, proceed to step 4.
Press [Protect Passcode].
4
Enter the current protect passcode using the numeric keys, and press [Enter].
5
To Next Page
Loading...
Need help?
General
