2-20 Confirming the Destination Before Transmission
Select [ON] and press [Enter].
6
Press [OFF] to disable the destination confirmation function.
Setting the Confirmation Dial Functions
When using an address book destination or entering a destination using the numeric
keys, a screen prompting you to re-enter the entered fax number is displayed. Re-entering
the number enables you to check whether an incorrect number has been entered, which
prevents the transmission of faxes to the wrong destination.
There are two confirmation dial functions you can set; confirm speed-dial and confirm
numeric keys.
When using manual transmission (transmission using the [Monitor] function, an
optional handset or external phone handset), the confirm dial function is disabled,
even if you set it to ON.
Setting the Confirm Speed-Dial Function
Press <Setting>.
1
Press [Management].
2
If an administrator password is set, enter the password and press [Enter].
3
If an administrator password is not set, proceed to step 4.
Press [Security Communication].
4
To Next Page
Loading...
Need help?
General
