List of Machine Management Settings 2-3
1
2
Management
Function Description Settings Reference page
Mirroring You can copy the settings
information to another machine
(must be the same model).
Direct Copy Allowed
Allowed
NotAllowed
2-78
Initialize all
data
You can erase the data set in the
<Setting> mode, such as the address
book and copy/fax function settings,
and the data saved in the machine,
such as the stored documents. When
this operation is done, the machine
reboots from itself.
Data that has been cleared cannot
be restored.
PIN Mode The entered PIN (personal
identification number) will not
appear in the journal, error message
printout, delayed command list or
transmission report.
OFF
Mode1
Mode2
2-26
Admin
Password
You can set the administrator
password.
You can set an administrator
password to prevent users other
than the administrator from editing
the settings in the [Management]
screen.
No administrator
password is set at
shipment.
2-4
Protect
Passcode
You can set the protect passcode.
A protect passcode is required when
using function protect settings.
No protect passcode is
set at shipment.
2-7
Underlined values are the default settings specified at the time of shipment.
To Next Page
Loading...
