Muratec MFX-3550 - Managing USB Memory

Backing up data
1. Insert a USB memory device into the USB memory port on your machine.
2. Press Menu on the control panel.
3. Press the up/down arrow to highlight System Setup and press OK.
4. Press the up/down arrow to highlight Machine Setup and press OK.
5. Press the up/down arrow to highlight Export Setting and press OK.
6. Press the up/down arrow until the option you want highlights.
z
Address Book: Backs up all Address Book entries.
z
Setup Data: Backs up all system settings.
7. Press OK to begin backing up the data.
The data is backed up to the USB memory.
8. Press Stop/Clear to return to ready mode.
Restoring data
1. Insert a USB memory device on which the backup data is stored in to the USB memory port.
2. Press Menu on the control panel.
3. Press the up/down arrow to highlight System Setup and press OK.
4. Press the up/down arrow to highlight Machine Setup and press OK.
5. Press the up/down arrow to highlight Import Setting and press OK.
6. Press the up/down arrow until the data type you want highlights and press OK.
7. Press the up/down arrow until the file containing the data you want to restore highlights and press
OK.
8. To restore the backup file to the machine, press the left/right arrow to highlight Yes and press
OK.
9. Press Stop/Clear to return to ready mode.
MANAGING USB MEMORY
DYou can delete image files stored on a USB memory device one by one or all at once by reformatting
the device.
Deleting an image file
1. Insert a USB memory device into the USB memory port on your machine.
2. Press Direct USB on the control panel.
3. Press the up/down arrow to highlight File Manage and press OK.
4. Press the up/down arrow to highlight Delete and press OK.
5. Press the up/down arrow until the folder or file you want highlights and press OK.
If you selected a file, the display shows the size of the file for about 2 seconds. Go to the next
step.
If you selected a folder, press the up/down arrow until the file you want to delete highlights and
press OK.
6. To delete file, press the up/down arrow to highlight Yes and press OK.
7. Press Stop/Clear to return to ready mode.
After deleting files or reformatting a USB memory device, files cannot be restored. Therefore,
confirm that you no longer need the data before deleting it.
If you see + in the front of a folder name, there are one or more files or folders in the selected
folder.
Pa
g
e 4 of 5Usin
g
USB memor
y
device
8/4/2009htt
p
://downloadcenter.samsun
g
.com/content/UM/200907/20090721152022250/EN/en
g
lish
/
...
144