Muratec MFX-3550 - Basic Printing

BASIC PRINTING
Your machine allows you to print from various Windows, Macintosh, or Linux applications. The exact
steps for printing a document may vary depending on the application you use.
The following procedure describes the general steps required for printing from various Windows
applications.
The following Printing Preferences window is for Notepad in Windows XP. Your Printing
Preferences window may differ, depending on your operating system or the application you are using.
1. Open the document you want to print.
2. Select Print from the File menu. The Print window appears.
3. Select your machine from the Select Printer list.
Multiple pages per sheet O O
(2, 4)
O
Fit to page printing O O O
Reduce and enlarge printing O X O
Different source for first page X X O
Watermark X X X
Overlay X X X
Double-sided printing (duplex)
[a]
O O O
[a]
The machine with Du
p
lex feature
p
rints both side of a
p
a
p
er.
z
Your Printing Preferences window that appears in this user’s guide may differ depending on
the machine in use. However, the composition of the Printing Preferences window is similar.
Check the operating system(s) that are compatible with your machine. Refer to the OS
compatibility section of Printer Specifications . (See Printer specifications
.)
z
When you select an option in Printing Preferences, you may see a warning mark, , or
. An exclamation mark ( ) means you can select that certain option but it is not
recommended, and ( ) mark means you cannot select that option due to the machine’s
setting or environment.
Macintosh basic printing. (See Macintosh printing.)
Linux basic printing. (See Linux printing.)
Pa
g
e 2 of 23Printin
g
8/4/2009htt
p
://downloadcenter.samsun
g
.com/content/UM/200907/20090721152022250/EN/en
g
lish
/
...
82