Section 40 00-02-0994
2016-06-28 - 35 -
Analog Input 7. Factory set to Disabled
Analog Input 8. Factory set to Disabled
Function:
Disabled
4-20 mA Oil Pressure
0-5V Oil Pressure
4-20mA Coolant Temp
0-5V Coolant Temp
4-20mA Fuel Level
0-5V Fuel Level
4-20mA Oil Temp
0-5V Oil Temp
4-20mA Suction Pressure
0-5V Suction Pressure
4-20mA Discharge Pressure
0-5V Discharge Pressure
4-20mA System Level
4-20mA Flow Rate
4-20mA Pump Oil Temperature
0-5V Pump Oil Temp
4-20mA Pump Housing Temp
0-5V Pump Housing Temp
4-20mA Ambient Temp
0-5V Ambient Temp
4-20mA Gear Box Pressure
0-5V Gear Box Pressure
0-5V Throttle Input
Datcon Oil Pressure
Murphy Oil Pressure
VDO5 Bar Oil Pressure
VDO7 Bar Oil Pressure
Murphy Coolant Temp
Datcon Coolant Temp
VDO Coolant Temp
Murphy Fuel Level
VDO Fuel Level
Datcon Fuel Level
Murphy Oil Temp
Datcon Oil Temp
VDO Oil Temp
Murphy Discharge Pressure
Murphy Suction Pressure
Datcon Pump Housing Temp
Murphy Pump Housing Temp
VDO Pump Housing Temp
Murphy Pump Oil Temperature
Datcon Pump Oil Temperature
VDO Pump Oil Temperature
Murphy PMK-400 Pressure
Analog.Digital1
Sensor Setup (only appears when the analog inputs are configured. This sets the range of sensors for 4-
20mA or 0-5V senders.)
Oil Pressure (0-5V) or (4-20mA)
Ambient Temp (0-5V) or (4-20mA)
To Next Page
Loading...