Manual Cube67+ | System Manual
27
3.2.7 External supply of the actuator supply
The power distributor Cube67 PD 7/8“ is used for the actuator supply of the compact modules. The
power distributor assures an active energy circuit. It is fitted out with a short-circuit detection on out-
puts. The LED indicators on the M12 sockets display the status of the output voltage.
ATTENTION:
The power distributor must not be used to supply the bus node via the internal sys-
tem connection. Supply of the green system line is also prohibited.
To Next Page
Loading...
Need help?
General
