Introduction to the Instrument
Main features
◆200Msps high-speed sampling, 40MHz analog bandwidth, 6000 digital multimeter
◆Rotary knob for switching oscillography with three types of waveform scanning mode i.e. automatic mode,
regular mode and single-time mode
◆Save function for data and waveform in the measurement; a total of 100 sets of data and 50 waveform can be
saved
◆Parameters i.e. time base and waveform scanning mode can be set in measurement of waveform
◆TRMS, measure the virtual value of waveform without taking into account the waveform parameter and distortion
◆REL, effectively eliminate the lead resistance, distributed capacitance and interference signal
◆The functions include DC/AC voltage/current, resistance, capacitance, frequency, temperature, diode/continuity
test, triode
◆Automatic/manual switching for measuring range and display of measurement data and historic data on the same
screen
◆Overload protection 500mA/10A double protective tube, dual protection of the instrument
◆Automatic shutdown in case of no operations for 15 minutes: bright backlight and clear display
◆higher reliability: no adjustment of potentiometer is required for panel calibration and internal storage calibration
To Next Page
Loading...
Need help?
General
