NOTE
If one time of head cleaning was not enough to
remove blurred or missing parts in the check
pattern, perform “Long” cleaning.
If those problems above were not improved after a
few times of head cleaning, refer to the following,
and perform required procedures.
Operation Manual “7 Troubleshooting”
VJ-2638X/1938X/1638X/1938WX/1638WX INSTALLATION MANUAL
No nozzle clog
Nozzle clogged
11
Checking printing conditions
Check the condition of the print head after the ink
replenishment.
1. Turn ON the printer and load the roll media.
10 Loading the roll media
2. Confirm that “Ready to print” is displayed on
Operation panel.
3. Confirm that “Ready to print” is displayed on
Operation panel.
Nozzle check printing starts.
4. Check the sample print for blurred or missing
parts in the check pattern.
5. If the nozzle check result indicates that there is a
problem such as mentioned above in the check
pattern, clean the head.
Press and hold the [>] key on the operation panel
for two seconds or more.
“Cleaning **%” is displayed on the operation panel.
6. Head cleaning starts.
7. Perform nozzle check printing again and check
the condition of the print head.
12 Manual composition
This product includes the following three manuals.
Installation Manual (this manual)
This manual explains the procedures of unpack
ing, installing, and the basic set up.
Product Activation Guide
This manual explains the procedures when the
printer starts up first time.
Operation Manual (CD-ROM)
The Operation Manual explains the basic installat
ion, daily use and applicable functions.
TIP
Please download the “Product Activation Guide”
from the ValueJet Club below.
https://valuejetclub.mutoh.co.jp/mutoh/guser/
Operation Manual of this product is created with
PDF format.
Adobe Acrobat Reader 6.0 or above is required to
view PDF format.
Adobe Reader is available for free download at
Adobe’s website.
To Previous Page
Loading...
Need help?
General