Maintenance
- 91 -
B
- Press “OK” for less than three seconds; the displayed
setting will start flashing.
- By repeatedly pressing “OK” for less than three
seconds, the following settings can be displayed in
sequence:
•
“SLOW RESPONSE”
• “FAST RESPONSE”
- Press “OK” for more than three seconds; the new set-
ting will be confirmed. The displayed caption stops
flashing and after a few seconds the display returns to
“ENGINE RESPONSE” mode.
- Engine RPM limiter: Press “OK” for less than three
seconds until “RPM LIMITER” appears.
- Press “SET” for less than three seconds. The display
shows the current setting for engine RPM limiter.
To Next Page
Loading...
