Suspension and wheels
F
- 41 -
Remove the 2 key switch fixing screws and extract
them.
When reassembling, apply the following
tightening torque: 22 ÷ 24 N·m
Steering damper connecting rod removal
Remove the locknut of the screw (1) that connects the
connecting rod to the steering head.
Remove the screw (2) that connects the connecting
rod to the steering head.
1
2
Remove the screw (3) that connects the connecting
rod to the steering damper.
Check that the connecting rod is in good condition and
that play is not present on the two bearings.
If play is found, substitute the worn parts with new
ones.
3
To Next Page
Loading...
