Nabco Acusensor M User Manual

1 of 28
Acusensor M Installaon Manual
P/N C-00187 Rev 8-25-17
Nabco Entrances Inc. S82 W18717 Gemini Drive Muskego, Wisconsin 53150
Phone: (877) 622-2694 Fax: (888) 679-3319 www.nabcoentrances.com
NABCO hours of Operaon: Monday to Friday 8:00 a.m.- 4:30 p.m. (Central Time)
• Turn OFF all power to the Automatic Door if a Safety System is not working.
• Instruct the Owner to keep all power turned OFF until corrective action can be achieved
by a NABCO trained technician. Failure to follow these practices may result in serious
consequences.
• NEVER leave a Door operating without all Safety detection systems operational.
WARNING
Table of Contents
 ............................................................. 3
Secon 1.1: Warning Labels ...................................................................3
Secon 1.2: General Safety Recommendaons ...................................................3
 .............................................................. 4
Secon 2.1: To the Installer ....................................................................4
Secon 2.2: Objecve ........................................................................4
 ..................................................... 4
 .......................................... 5
 .......................................... 8
Secon 5.1: Secure Sensor to Header ...........................................................8
Secon 5.2: Install the Angled Spacer (Sold Separately) ............................................8
 ............................................. 9
Secon 6.1: Wire Swing Door with Monitoring (Opus Control) .......................................9
Secon 6.2: Wire Fold Door with Monitoring (Opus Control) .......................................10
Secon 6.3: Wire Slide Door with Monitoring (U30 Control) ........................................10
 ............................................... 
Secon 7.1: Operaon Mode (Switches 1 and 2) .................................................12
Secon 7.2: Output Logic (Switch 3) ...........................................................12
Secon 7.3: Input Logic (Switch 4) .............................................................13
Secon 7.4: Width Seng (Switches 5 thru 8) ...................................................13




Nabco Acusensor M Specifications

General

Brand	Nabco
Model	Acusensor M
Category	Accessories
Language	English