W415-1802 / A / 11.06.18
EN
4
table of contents
The information throughout this manual is believed to be correct at the time of printing. Wolf Steel
Ltd. reserves the right to change or modify any information within this manual at any time without
notice. Changes, other than editorial are denoted by a vertical line in the margin.
note:
1.0 general information 5
1.1 rates and efficiencies 6
1.2 rating plate information 8
1.3 operating and lighting instructions 9
1.4 shut-off valve 9
1.5 dimensions 10
1.6 minimum clearance to combustibles 10
2.0 installation planning 11
2.1 levelling the appliance 11
2.2 chimney connection 12
2.3 gas installation 13
3.0 finishing 14
3.1 minimum combustible mantel clearances 14
3.2 safety barrier & door removal / installation 15
3.3 log placement 16
3.3.1 log placement for GDI3 16
3.3.2 log placement for GDIX3 19
3.4 media installation 22
3.5 logo placement 22
3.6 glowing embers 22
3.7 charcoal embers 23
3.8 battery installation (GDIG3 / GDIX3) 24
4.0 electrical information 25
4.1 wiring diagram (GDIG3 / GDIX3) 25
5.0 adjustments 26
5.1 pilot burner adjustment 26
5.2 venturi adjustment 26
5.3 flame characteristics 27
6.0 maintenance 28
6.1 annual maintenance 29
6.2 care of glass 29
6.3 care of plated parts 30
6.4 door glass replacement 30
6.5 media tray installation 30
6.6 night light™ replacement (GDIG3 / GDIX3 31
6.7 valve train replacement 32
7.0 replacement parts 33
7.1 overview 34
7.2 right side access plate assembly 35
7.3 valve train assembly (GDI3) 36
7.4 valve train assembly (GDIG3) 37
7.5 valve train assembly (GDIX3) 38
7.6 firebox top assembly 39
8.0 troubleshooting (millivolt - GDI3) 40
9.0 troubleshooting (electronic - GDIG3 / GDIX3) 42
10.0 warranty 45
To Next Page
Loading...
Need help?
General
