Napoleon PRESTIGE 500 User Manual (English)

Other manuals for Napoleon PRESTIGE 500

L
Lisa DavisSep 1, 2025
What to do if ignitor works but the knob lights don’t illuminate on Napoleon Grill?
- J
  james24Sep 1, 2025
  If the ignitor works but the knob blue lights don’t illuminate when turn on the light switch and the knob red lights also don’t illuminate when turn on the gas burners on your Napoleon Grill, connect the knob light wire connector to the main wire connector inside of the control panel. If that doesn’t work, replace the light switch, the wire harness of the control panel, or the batteries.
M
martinezmichaelSep 1, 2025
Why do the knob and switch lights blink on my Napoleon PRESTIGE 500 Grill?
- J
  Jessica WilsonSep 2, 2025
  If the knob and switch lights blink eight times with 0.5 seconds intervals and then turn off on your Napoleon Grill, replace the batteries.
C
Cynthia WadeSep 3, 2025
What to do if the infrared burner flashes back on my Napoleon PRESTIGE 500?
- K
  Keith LewisSep 3, 2025
  If your Napoleon Grill's infrared burner flashes back, turn it off and let it cool for at least two minutes. Then, relight it and burn on high for at least five minutes until the ceramic tiles glow red evenly. Make sure that objects or accessories cover no more than 75% of the grill surface. If the issue continues, inspect the burner for cracks after it cools down. If cracks are found, contact your Napoleon dealer for a replacement.
T
tylerwhiteSep 14, 2025
What to do if Napoleon PRESTIGE 500 Grill burner output on high is too low?

General