National Instruments Compact FieldPoint cFP-20 Series User Manual

Chapter 1 Overview of Compact FieldPoint
cFP-20xx and cFP-BP-x User Manual 1-4 ni.com
2. Install software as described in Chapter 2, Installing Compact
FieldPoint Hardware and Software.
a. Install programming software (LabVIEW RT).
b. Install FieldPoint software.
3. Configure Compact FieldPoint system and verify configuration as
described in the Measurement & Automation Explorer Help for
FieldPoint.
a. Configure cFP-20xx network settings.
b. Configure I/O module ranges and settings.
c. Configure security.
d. Connect input signals and loads to I/O modules.
e. Test channels.
f. Save settings.
4. Configure optional settings as described in Chapter 3, Feature
Descriptions.
5. Develop application as described in Chapter 4, LabVIEW RT
Programming.
a. Launch LabVIEW RT.
b. Build basic application.
c. Switch execution target to test application on cFP-20xx.
d. Embed application by building
.exe with LabVIEW RT targeted
to cFP-20xx.
e. Test embedded application.
6. Deploy system.

National Instruments Compact FieldPoint cFP-20 Series Specifications

General

Brand	National Instruments
Model	Compact FieldPoint cFP-20 Series
Category	Network Hardware
Language	English