Chapter 4 LabVIEW RT Programming
cFP-20xx and cFP-BP-x User Manual 4-10 ni.com
4. Select Application (EXE) from the Build target pull-down menu.
5. Click the Source Files tab.
6. Click Add Top-Level VI.
7. Navigate to the location of the VI to be added.
8. Select the VI to be added.
9. Click OK.
10. Click Build.
Target Tab
On the Target tab, the Application Builder determines the Target
file name, Destination directory, and Support file directory from the
Application Path setting in RT Target Options. You cannot change
the Application name, Destination directory, and Support file directory
settings in the Application Builder when you target LabVIEW RT to the
cFP-20xx. Refer to the RT Target Options section for more information
about accessing and using RT Target Options.
To Next Page
Loading...
