Appendix A Troubleshooting
cFP-20xx and cFP-BP-x User Manual A-2 ni.com
3 The cFP-20xx is in safe mode. Turn the SAFE MODE switch off and
restart the controller. If there is no software installed on the controller,
download and install software as described in the Measurement &
Automation Explorer Remote Systems Help.
4 (or more) The cFP-20xx has detected an unrecoverable error. Contact National
Instruments for assistance.
Table A-1. STATUS LED Flashes and Corresponding Error Conditions (Continued)
Number of Flashes Error Condition
To Next Page
Loading...
