Appendix C Common Questions
DAQCard-700 User Manual C-2 ni.com
referenced to the same ground level as the DAQCard reference. There are
various methods of achieving the same ground level while maintaining a
high CMRR. These methods are outlined in Chapter 3, Connecting Signals.
I want to use NI-DAQ to program the DAQCard-700. How can I
determine which NI-DAQ functions support the DAQCard?
If you are using NI-DAQ 6.7 or later, refer to the NI-DAQ Function
Reference Help.ClickNI-DAQ Functions»Listed by Hardware Product
for a complete list of functions supported by the DAQCard-700. If you are
using NI-DAQ 6.6 or earlier, refer to Appendix C, NI-DAQ Function
Support,oftheNI-DAQ Function Reference Manual for PC Compatibles.
I wish to register-level program the DAQCard-700. Where can I find
the information that I need to accomplish this task?
Register-level programming is not recommended for most users. Even
experienced register-level programmers will find that using the NI-DAQ,
LabVIEW, or Measurement Studio ADE is as easy and as flexible as
register-level programming and can save weeks of development time.
However, if you choose to register-level program, you can download
the DAQCard-700 Register-Level Programmer Manual from
ni.com/manuals
.
To Next Page
Loading...
