Glossary
© National Instruments Corporation G-3 DAQCard-700 User Manual
DC direct current
DGND digital ground signal
DIFF differential configuration
DIN digital input signal
DIO digital input/output
DOS disk operating system
DOUT digital output signal
drivers/driver software software that controls a specific hardware device such as a DAQ device
E
EEPROM erasable programmable read-only memory—ROM that can be erased
(usually by ultraviolet light exposure) and reprogrammed
EXTCONV external control signal to trigger A/D conversions
EXTINT external interrupt signal
F
Ffarads
FIFO first-in-first-out
ft feet
G
GATE gate input signal
gh gate hold time
gsu gate setup time
gwh gate high level
gwl gate low level
H
Hz hertz
To Next Page
Loading...
