Index
FP-2000/2010/2015 User Manual I-2 ni.com
Declaration of Conformity, F-1
diagnostic resources, F-1
DIN rail mount. See installation, mounting
hardware on DIN rail
DIP switches, 4-6
Disable VI switch, 4-6
DNS address
choosing values, A-1
configuring, 3-4
resetting with Reset switch, B-1
documentation
online library, F-1
downloading files to the FP-20xx,5-11
downloading LabVIEW VIs to the
FP-20xx,5-6
drivers
instrument, F-1
software, F-1
E
electromagnetic compatibility
specifications, E-2
embedded applications on FP-20xx,4-1,5-8,
5-10, C-4
environmental specifications, E-2
errors
I/O status shown in FieldPoint
Explorer, -14
runaway startup application, C-4
STATUS LED, 4-4
STATUS LED error indications
(table), C-4
troubleshooting software configuration
problems, C-1
Ethernet network
cable length (caution), 2-11
cabling connections (table), E-3
connecting FP-20xx to network, 2-11
connections
ACTIVE LED indicator, 4-5
figure, 1-3
LINK LED indicator, 4-5
methods, 2-12
example code, F-1
F
factory configuration, 3-10
FieldPoint bank (definition), 1-2
FieldPoint Explorer
configuring devices and channels, 3-6
configuring the FP-20xx,3-1
downloading configuration to
FP-20xx,3-14
installation, 2-15
monitoring I/O channels, 3-14
saving configuration, 3-14
saving configuration as power-up
state, 3-10
troubleshooting No Modules Found, C-3
verifying configuration, 3-14
writing to an output channel, 3-15
FieldPoint safety information, 2-1
FieldPoint software
See also FieldPoint Explorer; Remote
System Explorer
FTP download site, 1-3
installation, 2-15
OPC server, 3-19
overview, 1-3
FieldPoint VIs, 3-17, 4-7
file transfer capability, 5-11
FP-20xx hardware
comment to identify FP-20xx,3-4
configurable power-up state, 4-3
configuration in FieldPoint Explorer, 3-1
connecting to network, 2-11
data communication methods, 3-20
DIP switches, 4-6
To Next Page
Loading...
