National Instruments GPIB Series User Manual

Chapter 4 GPIB Configuration
GPIB-ENET/100 for Windows Me/98/95 4-2 ni.com
Figure 4-1. Network Settings Tab
The NI-488.2 Configuration utility context-sensitive online help contains
all of the information that you need to configure the NI-488.2 software
properly. To view the online help, click on the question mark (
?
) button
in the toolbar and click on any item for more information about it.
Note
In the online help, all references to the GPIB-ENET apply also to the
GPIB-ENET/100.

National Instruments GPIB Series Specifications

General

Bus Interface	GPIB (IEEE 488)
Operating Systems Supported	Windows, Linux, macOS
Weight	Varies by model
Form Factor	PCI, PCIe, USB
Number of GPIB Ports	1
Software Support	NI-488.2 driver
Compatibility	IEEE 488.1, IEEE 488.2
Connector Type	24-pin IEEE 488 connector
Power Requirements	Varies by model (e.g., USB bus-powered or external power)
Dimensions	Varies by model
Data Transfer Rate	Up to 8 MB/s