National Instruments GPIB Series User Manual

Chapter 6 Using Your GPIB-ENET/100 and NI-488.2
© National Instruments Corporation 6-7 GPIB-ENET/100 for Windows Me/98/95
7. The utility prompts you to confirm the change you are about to
perform. Click OK to continue. As the update utility transfers the
firmware image to your GPIB-ENET/100, the Update Progress status
bar fills, and the Current status box describes each step in the process.
The Current status box reports whether the firmware update
completed successfully or failed. The GPIB-ENET/100 automatically
reboots with the new firmware in effect.
8. Click Exit to close the NI Ethernet Device Firmware Update utility.

National Instruments GPIB Series Specifications

General

Bus Interface	GPIB (IEEE 488)
Operating Systems Supported	Windows, Linux, macOS
Weight	Varies by model
Form Factor	PCI, PCIe, USB
Number of GPIB Ports	1
Software Support	NI-488.2 driver
Compatibility	IEEE 488.1, IEEE 488.2
Connector Type	24-pin IEEE 488 connector
Power Requirements	Varies by model (e.g., USB bus-powered or external power)
Dimensions	Varies by model
Data Transfer Rate	Up to 8 MB/s