National Instruments GPIB Series - Software Characteristics; Connectors and Electrostatic Discharge Protection; Network Specifications

Appendix C Specifications
GPIB-ENET/100 for Windows Me/98/95 C-2 ni.com
Software Characteristics
Maximum software transfer rate
1
...........Over 800 kbytes/s
Electrostatic Discharge Protection
Non-isolated devices...............................1.5 kV
Connectors
Ethernet connector..................................RJ-45
GPIB connector ......................................IEEE 488 standard 24 pin
Network Specifications
Connection type......................................IEEE 802.3 compliant
100BaseTX (100 Mbits/s)
10BaseT (10 Mbits/s)
Duplex mode...........................................Half duplex
1
Actual speed may vary considerably from speed shown due to system, network, and instrumentation capabilities.