6 How to get RAZORS Vocoder to work
In the filter 1 section a Vocoder can be selected as filter type. In the following paragraph
we explain how to feed an audio signal into the Vocoder and how to include RAZOR in a
DAW in order to use its Vocoder.
For more information on the vocoder please read its description in the filter 1 section of this
manual.
6.1 Using REAKTORS internal sample player
A simple way to feed audio in the Vocoder is to play back audio files with the built in sam
ple player of REAKTOR or REAKTOR PLAYER. It can be found on the left hand side of the
'Player Recorder' bar located below the Instrument panel. In case it is hidden View > Show
Player Recorder needs to be checked.
For more info on the sample player please refer to the REAKTOR and REAKTOR PLAYER
manual.
6.2 Using the audio input of a soundcard in REAKTOR standalone
In REAKTOR or REAKTOR PLAYER standalone version the audio input from a sound card
is routed into the vocoder. Please make sure the right sound card and the right audio input
of that soundcard is selected in File > Audio MIDI Settings... > Audio and File > Audio MIDI
Settings... > Routing > Input.
For more info on the soundcard settings please refer to the REAKTOR and REAKTOR PLAYER
manual.
How to get RAZORS Vocoder to work
Using REAKTORS internal sample player
RAZOR - Manual - 71
To Next Page
Loading...
Need help?
General
