Native Instruments TRAKTOR KONTROL S2 Instructions

6. MIXING YOUR FIRST TRACKS USING SYNC
In this section you will learn to mix your first two tracks, using Deck A and Deck B, and the SYNC
function. For this method, you will not need to use Jog Wheels or your headphones. If you want to
try a more advanced method of mixing, using the Jog Wheels and headphones, refer to section
Mixing Tracks Using Jog Wheels.
At first you will prepare the Mixer by adjusting the control elements for mixing, from Deck A to B.
Then you will load the first track into Deck A, and begin to perform step by step.
6.1. Prerequisites
1. Set the crossfader to the left-most position.
2. Set Channel fader A and Channel fader B to maximum position.
3. Set the MASTER knob to center position at 0.0 dB.
4. Set the volume of your audio system or active speakers to minimum level.
6.2. Loading the First Track into Deck A
1. Press the Browser View button to open the Browser view in the software.
2. Turn the BROWSE encoder to select one of your tracks, or a demo track i.e. Berlin Haupt-
bahnhof by Native Instruments.
Mixing Your First Tracks using SYNC
20

Native Instruments TRAKTOR KONTROL S2 Specifications

General

Brand	Native Instruments
Model	TRAKTOR KONTROL S2
Category	DJ Equipment
Language	English