Native Instruments TRAKTOR KONTROL S2 Instructions

The tempos of both tracks are now synced, indicated by the equal tempo value in the soft-
ware's Deck Header. The SYNC button lights up on Deck B.
6.6. Starting Playback of the Second Track
When the track in Deck A is almost over:
• Press the Play/Pause button on Deck B to start playback.
The waveform starts moving and the Channel Volume Meter LEDs in Mixer channel B illumi-
nate. The tracks in Deck A and Deck B play in sync.
6.7. Mixing in the Audio Signal
You can now mix the audio signal of Mixer channel B into the Master signal:
1. Move the crossfader slowly towards center position and hold for a moment.
The audio signal of the track in Mixer channel B fades into the Master signal.
2. While the track in Deck A reaches its end, slowly move the crossfader towards the right-most
position.
Mixing Your First Tracks using SYNC
23

Native Instruments TRAKTOR KONTROL S2 Specifications

General

Brand	Native Instruments
Model	TRAKTOR KONTROL S2
Category	DJ Equipment
Language	English