Native Instruments TRAKTOR KONTROL S2 Instructions

1. While holding the GRID button, slightly turn the Jog Wheel clockwise or counter-clockwise to
move the Beatgrid forward or backward, respectively.
By turning the Jog Wheel you are able adjust the Beatgrid, so that the Beat tick matches the
beat of the track.
2. Release the GRID button.
The track's Beatgrid is corrected and saved for the track.
7.16. Mixing Tracks Using Jog Wheels
In this section you will learn how to mix your first two tracks using Deck A and Track B, the Jog
Wheels and your headphones. At first, you will prepare the Mixer by adjusting the control elements
for mixing from Deck A to B. Then you will load the first track into Deck A, and begin to perform
step by step.
7.16.1. Prerequisites
1. Set the crossfader to the left-most position.
2. Set Channel fader A and Channel fader B to maximum position.
3. Set the MASTER knob to center position.
4. Set the volume of your audio system or active speakers to minimum level.
7.16.2. Loading the First Track into Deck A
1. Press the Browser View button to open the Browser view in the software.
Tutorials
36

Native Instruments TRAKTOR KONTROL S2 Specifications

General

Brand	Native Instruments
Model	TRAKTOR KONTROL S2
Category	DJ Equipment
Language	English