Native Instruments TRAKTOR KONTROL S2 Instructions

9. ADDING A MICROPHONE
To add a microphone to your S2 system:
1. Connect the microphone into the MIC input on the rear panel of the S2.
2. Set the microphone input signal to an adequate level by turning the MIC GAIN knob on the
rear panel of the S2.
3. Press the MIC button to add the microphone signal to the MASTER signal.
4. Press the MIC button again to remove the signal from the MASTER signal.
Adding a Microphone
46

Native Instruments TRAKTOR KONTROL S2 Specifications

General

Brand	Native Instruments
Model	TRAKTOR KONTROL S2
Category	DJ Equipment
Language	English