Native Instruments Traktor Kontrol Z2 Setup Guide

2.2.2 Select the Components to Install
After you have accepted the software license agreement, the installer window displays the
components available for installation.
There is no dedicated entry for your TRAKTOR KONTROL Z2 in the components selection
screen as the Z2 does not require a dedicated driver under MAC OS X. It is recommended
to keep all remaining drivers selected unless you have a specific reason to deselect one
(such as if the driver is already installed on your computer, or you are very sure you will
never use the device with TRAKTOR).
This installer screen also contains information about how much disk space the individual com-
ponents will use.
The components selection screen of the installation program.
Software Installation
Installation on Mac OS X
TRAKTOR KONTROL Z2 - Setup Guide - 10

Native Instruments Traktor Kontrol Z2 Specifications

General

Frequency range	20 - 20000 Hz
Channels quantity	6 channels
Supported sample rates	48 kHz
Digital sound processing	24 bit
AUX in	Yes
XLR out	2
AUX out ports	1
Headphone connectivity	3.5 mm/6.35 mm
Product color	Black
USB connector type	USB Type-A, USB Type-B
AC input voltage	115 - 230 V
Power consumption	750 mA
AC input frequency	50 - 60 Hz
Minimum storage drive space	1024 MB
Mac operating systems supported	Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina
Windows operating systems supported	Windows 10