►
Connect your headphones to one of the PHONES sockets on the front panel of the device;
use the left socket if your headphones use a 3.5mm jack, or the right socket for a 6.3mm
jack.
4.5 Connecting an Amplification System
Switch off your amplification system (active speakers or power amplifier), and set the vol-
ume faders on the Z2 to minimum before you proceed. Later on, slowly increase the vol-
ume while music is playing until a desired listening level is reached.
To connect your power amplifier or active speakers to the TRAKTOR KONTROL Z2:
Setting Up Your TRAKTOR KONTROL Z2 System
Connecting an Amplification System
TRAKTOR KONTROL Z2 - Setup Guide - 37
To Next Page
Loading...
