Native Instruments Traktor Kontrol Z2 Setup Guide

4.7 Connecting Turntables
If you want to use CD players instead of turntables, you can skip this chapter and continue
reading in chapter ↑4.8, Connecting CD Players. Please note:
▪ We assume that, when viewed from the DJ's position, one turntable is placed on the left
of your DJ mixer, while the other turntable is placed on the right. Therefore, in this Setup
Guide, the left and right turntables are labeled L and R, respectively.
▪ We assume that you have already connected your turntables to power outlets, but did not
switch them on yet. If your turntables are switched on, switch them off before proceeding.
4.7.1 Connect the Left Turntable
To connect the left turntable:
Setting Up Your TRAKTOR KONTROL Z2 System
Connecting Turntables
TRAKTOR KONTROL Z2 - Setup Guide - 40

Native Instruments Traktor Kontrol Z2 Specifications

General

Frequency range	20 - 20000 Hz
Channels quantity	6 channels
Supported sample rates	48 kHz
Digital sound processing	24 bit
AUX in	Yes
XLR out	2
AUX out ports	1
Headphone connectivity	3.5 mm/6.35 mm
Product color	Black
USB connector type	USB Type-A, USB Type-B
AC input voltage	115 - 230 V
Power consumption	750 mA
AC input frequency	50 - 60 Hz
Minimum storage drive space	1024 MB
Mac operating systems supported	Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina
Windows operating systems supported	Windows 10