Native Instruments Traktor Kontrol Z2 Setup Guide

TRAKTOR KONTROL Z2 turntable setup.
→
After you have connected the second turntable, your TRAKTOR KONTROL Z2 system is
complete and should be connected as depicted above. If you want to add CD players to
your setup, read chapter ↑4.8, Connecting CD Players first. Otherwise please continue
reading in chapter ↑4.10, Final Preparations.
4.8 Connecting CD Players
Please note:
▪ We assume that, when viewed from the DJ's position, one CD player is placed on the left
of your DJ mixer, while the other CD player is placed on the right. Therefore, in this Setup
Guide, the left and right CD players are labeled L and R, respectively.
▪ We assume that you have already connected your CD players to power outlets, but did not
switch them on yet. If your turntables are switched on, switch them off before proceeding.
Setting Up Your TRAKTOR KONTROL Z2 System
Connecting CD Players
TRAKTOR KONTROL Z2 - Setup Guide - 45

Native Instruments Traktor Kontrol Z2 Specifications

General

Frequency range	20 - 20000 Hz
Channels quantity	6 channels
Supported sample rates	48 kHz
Digital sound processing	24 bit
AUX in	Yes
XLR out	2
AUX out ports	1
Headphone connectivity	3.5 mm/6.35 mm
Product color	Black
USB connector type	USB Type-A, USB Type-B
AC input voltage	115 - 230 V
Power consumption	750 mA
AC input frequency	50 - 60 Hz
Minimum storage drive space	1024 MB
Mac operating systems supported	Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina
Windows operating systems supported	Windows 10