Nautilus E614 User Manual

32
6. Using a 6mm hex key, remove the four bolts that attach the Lift
Assembly to the Rail Assembly. Remove the Lift Assembly.
If you are only replacing the Lift Assembly, go to Step 11.
If you are replacing the Rail Assembly, continue to Step 7.
7. Place a static object (like a book or box) under the back of the main
frame but not under the Rail Assembly. The static object (*) should not be
compressible.
8. Using a 6mm hex key, remove the four bolts that attach the Rail
Assembly to the Frame Assembly.
Be aware that the Frame Assembly may be unstable and slightly
top heavy.
9. Remove the Rail Assembly.
The machine may be moved by one or more persons depending on
their physical abilities and capacities. Make sure that you and others
are all physically fit and able to move the machine safely.
NOTICE: This step may require two people.
10. Attach the new Rail Assembly to the Frame Assembly.
Note: Be sure Levelers are fully raised on Rail Assembly.
Be aware that the Frame Assembly may be unstable and slightly
top heavy. This step may require two people.
6mm
6mm
*

Nautilus E614 Specifications

General

Brand	Nautilus
Model	E614
Category	Elliptical Trainer
Language	English