To Next Page

To Previous Page

LC DISPLAY

MANAGEMENT MENU

To access the Management Menu, press and hold the SPEED UP and SPEED DOWN Keys for three seconds while in

Standby Mode. Treadmill is now in Management Menu Mode.

LE-X and LC Display:

1. TOTAL HOURS will be shown on the display, press the ENTER Key to advance.

2. TOTAL MILES/KMs will be shown on the display, press the ENTER Key to advance.

3. MAX SPEED will now be shown on the display and the treadmill’s current maximum operating speed will be

displayed. To change this max speed use the SPEED UP/DOWN Keys or numeric keypad and press the ENTER Key

to conﬁ rm. Note: The treadmill is preset from the factory to its highest operating speed. If the treadmill is to be used

in an unsupervised area, limit the MAX SPEED to a lower value.

4. MAX TIME will now be shown on the display and the treadmill’s current maximum workout time will be displayed.

The time can be adjusted up or down using the SPEED UP/DOWN Keys or numeric keypad if you wish to limit the

maximum workout time. Press the ENTER Key to conﬁ rm and advance.

5. UNITS – ENGLISH will now be shown in the display. Use the SPEED UP/DOWN Keys to select between ENGLISH

or METRIC units. Press the ENTER Key to conﬁ rm and advance.

6. (LC Model Only) UP LCD CONTRAST will now be shown in the display window. Use the SPEED UP/DOWN Keys

to adjust the display contrast for the upper display window as needed. Default value is 7. Press the ENTER Key to

conﬁ rm and advance.

7. (LC Model Only) LOW LCD CONTRAST will now be shown in the display window. Use the SPEED UP/DOWN

Keys to adjust the display contrast for the dot matrix window as needed. Default value is 7. Press the ENTER Key to

conﬁ rm and advance.

8. LANGUAGE – ENGLISH will now be shown in the display. Use the SPEED UP/DOWN Keys to select English,

French, German or Spanish languages. Press the ENTER Key to conﬁ rm and advance.

9. SOFTWARE VERSION will now be shown in the display. Press ENTER Key.

10. Treadmill will now exit Management Menu Mode and return to the Standby Mode.

Nautilus T516 User Manual

Questions and Answers: