120
30. The hydraulic lift is set up to drop gradually. Hold onto the walking deck until approximately 2/3 of the movement down. Make sure that you use
proper lifting technique; bend your knees and keep your back straight. Be aware that the walking deck can possibly drop quickly in the last part of the
movement.
Ifyouusedspraylubricant,wait5minutesbeforeturningonpowertothemachinetoallowtheaerosoltodissipate.
31.AttachthepowercordandturnontheTreadmillbyippingthepowerswitchtoON.
32.Staytoonesideofyourmachineandstartthebeltattheslowestspeed.Letthebeltoperateforapproximately15seconds.
Be sure not to touch the walking belt or step on the power cord. Keep bystanders, children and pets away from the machine you are servicing
at all times.
33. Switch off your machine.
34. Take care to clean up any excess lubricant from the deck.
To decrease the possibility of slipping, be sure the deck area is free from grease or oil. Clean off any excess oil from the machine surfaces.
35.FinalInspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner’s Manual.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
