131
6. Make sure that the locking mechanism is engaged. Carefully pull back on the
walking deck and make sure that it does not move. When you do this, keep clear of
movement path in case the treadmill lock is not engaged.
Do not lean against the treadmill when it is folded. Do not put items on it that
could cause it to become unstable or fall.
7. Using a #2 Phillips screwdriver, remove the indicated screw from the Rear Roller
Covers.
8. Remove the Rear Roller Covers.
9. Using a #2 Phillips screwdriver, remove the 12 indicated screws from below the
Walking Deck that attach the Side Rails.
10. Remove the Side Rails from the Walking Deck.
To Next Page
Loading...
