Nautilus T624 Service Manual

73
14. Using a #2 Phillips screwdriver remove the 2 indicated screws from
the MCB Cover and remove it.
15.RemovetheLowerI/OCableconnectorfromtheMotorControlBoard
after noting the location.
Note: Be sure to note where the Lower I/O Cable attaches for re-assem-
bly.
16. Remove the old Lower I/O Cable from the Frame Assembly. Route the
new Lower I/O Cable into the Frame Assembly following the old Cable as
a guide.
Note: do not crimp the Cables.
17. Connect the Lower I/O Cable connector to the Motor Control Board in
the proper location.
Note: do not crimp the Cable.
MCBCover
Lower I/O Cable
Motor Control
Board(MCB)

Nautilus T624 Specifications

General

Quantity per pack	1 pc(s)
Foldable	Yes
Bluetooth	No
Incline range	0 - 12 %
Maximum speed	19.3 km/h
Minimum speed	0 km/h
Product color	Black, Grey
Number of programs	22
Maximum user weight	136 kg
Backlight color	Blue

Weight and Dimensions

Width	- mm
Weight	- g
Running area (W x L)	20 x 55 mm
Running belt thickness	1.5 mm
Running deck thickness	19 mm