63Configuring the Remote Controller System
4.5 Remote Controller
LCD display
Indicates functions and
current status.
LED indicator
Indicates the status of water
heater.
- Green: Normal Mode.
- Red: Error occurred.
Preheat & Timer button
- Access the timer settings.
- Recirculation ON.
Up button
Increase the temperature
or value.
Down button
Decrease the temperature
or value.
Lock button
Locks the other button
operations.
Power button
Turns the remote controller
OK button
on or of f.
Timer is set. Recirculation Mode.
Displays the current time. Hot water is in use.
Displays the current set
temperature.
Water heater operation is
in progress.
Operations are locked.
An error code will appear
on the display.
To Next Page
Loading...
Need help?
General
