Navien NPE-210A2 Installation Manual

96 Operating the Water Heater
7.4.5 Setting the Display Options
1. Press the Menu button ( ) and then select
5. Configuration.
2. Press the Up button ( ) or the Down button
( ) to switch between information items. Press
the OK Button (
) to select an item to view the
information.
Item Description
1. Language
Select a display
language:
1. English
●
Default: English
2. Display Units
Setting
Set the display units.
1. °F, GPM, Feet
2. °C, L/M, Meter
●
Default: °F, GPM,
Feet
3. Time Setting
Set the time format.
●
Display: YYYY.MM.DD
/ HH:MM:SS
4. Backlight Time
Setting
Set the backlight time.
●
Setting range:
0 - 60 sec
●
Default: 10 sec
3. Press the Back button (
) to return to the
previous screen or menu.
7.4.4 Viewing Other System Information
1. Press the Menu button ( ), and then select
4. EMS Data.
2. Press the Up button ( ) or the Down button
( ) to switch between information items. Press
the OK Button (
) to select an item to view the
information.
Item Description
1. DHW Operation Time Monthly heating time
2. Recirc Operation Time
Monthly recirculation
time
3. Gas Consumption
Monthly gas
consumption
3. Press the Back button (
) to return to the
previous screen or menu.
Note
●
Gas Consumption is calculated for
the water heater only and may differ
from the amount measured on the
gas meter.
●
Gas Consumption may differ from
the amount measured on the gas
meter due to season, gas pressure,
calorific value, gas meter error, other
gas equipment usage, or other
variables.

Navien NPE-210A2 Specifications

General

Brand	Navien
Model	NPE-210A2
Category	Water Heater
Language	English