NCE Power Cab - Controlling Turnouts and Other Accessories

33
CONTROLLING TURNOUTS AND
OTHER ACCESSORIES
ENTER THE ACCESSORY NUMBER TO BE OPERATED
CONTROL 02:00PMCONTROL 02:00PM
CONTROL 02:00PMCONTROL 02:00PM
CONTROL 02:00PM
ACC NUMBER: _ACC NUMBER: _
ACC NUMBER: _ACC NUMBER: _
ACC NUMBER: _
Press the SELECT ACCY key. Enter the address of the accessory to be operated.
Followed by pressing the ENTER key. Valid accessory addresses range from 1 to
2044.
TURN ACCESSORY ON OR OFF
ACC: 003 02:00PMACC: 003 02:00PM
ACC: 003 02:00PMACC: 003 02:00PM
ACC: 003 02:00PM
1=N(ON) 2=R(OFF)1=N(ON) 2=R(OFF)
1=N(ON) 2=R(OFF)1=N(ON) 2=R(OFF)
1=N(ON) 2=R(OFF)
Press 1 to turn accessory ON. (Switch machine set to Normal)
Press 2 to turn accessory OFF. (Switch machine set to Reverse)
Note: If you are going to activate the same accessory, just “double-clicking” the
SELECT ACCY key will activate it.