Hardware Installation 2-13
Magnetic Stripe Reader (MSR) Cleaning
Caution: Prior to cleaning, please ensure that the terminal is not connected to a power
supply and not powered on.
Periodically, the MSR may need to be cleaned depending on usage. Pre-saturated MSR
cleaning cards can be ordered from NCR (50/box) using part number 1666-K024.
Otherwise, wrap a card with a saturated paper towel of glass cleaner and swipe gently to
clean the reader head.
Do not to use chlorine-based cleaners, such as Clorox bleach, non-chlorine bleach, or
chlorine-based bathroom or mildew cleaners. Also, do not use solvents such as acetone,
MEK, TCE, paint thinner, or turpentine.
Hardware Platform Drivers
The NCRPX10 POS (7746) uses the new NCR GEN3 drivers set. GEN3 drivers are
available on:
http://www5.ncr.com/support/support_drivers_patches_radiant.asp?Class=Hospitality/
To Next Page
Loading...
