NCR PX10 POS 7746 - Page 67

Controlled Deployment
BIOS Setup 4-57
Configuration Choices
Configuration Choice
Settings
Notes
Output Select [EDP1]
► Network Stack Configuration
Network Stack [Enabled]
Ipv4 PXE Support [Enabled]
Ipv4 HTTP Support [Disabled]
Ipv6 PXE Support [Enabled]
Ipv6 HTTP Support [Disabled]
PXE boot wait time 0
Media detect count 1
►CSM Configuration
CSM Support [Disabled]
► SATA Configuration
NVMe Configuration None used
► USB Configuration
USB Configuration
USB Module Version [17]
USB Controllers [1 XHCI]
USBDevices varies per devices used
Legacy USB Support
[Enabled]
XHCIHand-off
[Enabled]
USBMass Storage
Driver Support
[Enabled]
USB hardware delays and time-outs:
USB transfer time-out [20 sec]
Device reset time-out [20 sec]
Device power-up delay [Auto]
► Platform Trust Technology
TPM Configuration
fTPM [Enabled]